BorSafe HE3490-ELS-H

Producer

Borouge

Polymer

HDPE

Type

Pressure pipe compound

Classification

PE100-RC, MRS 11.2 MPa

Melt flow rate

0.17 g/10min · 190°C / 5.0 kg · ISO 1133

Density

960 kg/m³ · ISO 1183

Producer lists it for

Drinking water pressure pipe · Sewage · Relining · Sea outfall · Industrial pipe · Extra thick wall and very large diameter

What that means in practice

The combination the other two do not offer: PE100-RC crack resistance at the higher MRS 11.2 rating, with the lowest melt flow of the three so it holds its shape through an extra-thick wall. This is the one Borouge point at for the very largest diameters.

If these numbers are not something you work with daily, our HDPE grades and pricing guide explains what they measure and how prime, off-spec, regrind and regranulate differ.

What to check before buying BorSafe HE3490-ELS-H

• The classification is the specification: PE80, PE100 or PE100-RC, with the MRS figure attached. Two grades whose codes differ by one letter can be rated differently — BorSafe HE3490-LS is MRS 11.2 and HE3490-LS-H is MRS 10.0, and nothing on the sack will remind you.
• Colour is not cosmetic on pipe compound. Black is water and general pressure; orange and yellow mean gas across most of Europe. The wrong colour passes every mechanical test and fails inspection on site.
• For black grades, ask for the carbon black content and dispersion on the batch. That is what carries the UV life, and it is a batch property rather than something the grade name guarantees.
• If it is offered as off-spec or reprocessed, ask precisely what the deviation is. A compound that no longer meets its MRS rating is no longer the material the code names, whatever the paperwork says.

Buying or selling this?

Browse the board to see what is listed today — public, no account needed. Nothing matching? Post a Wanted requirement with the grade and tonnage you need and sellers come to you. Selling it? List it — free, no commission.